"The amazing temperature uniformity of the Shellab SRI20P allowed us to replace two compressor based BOD incubators with just this one unit. Previously, we had to use two units for our samples because the temperature uniformity spread was too large between the top and bottom shelves so that we could really only use the middle shelves. We definitely appreciate having more room in our lab. The slide out shelf is extremely convenient and the shelves in general are the sturdiest that I’ve seen in a BOD incubator. The energy savings of the SRI20P is also a very important feature for me. Clean Water Services is a steward for public health, environmental protection and economic vitality. This goes hand-in-hand with the Shellab SRI20P’s energy efficiency and the reduction we will see in our lab’s air conditioning loads."
Jim O’Reilly, BOD Lab Specialist, Clean Water Services
SKU:SRI20P Interior Outlet:115V-1/230V-2 Shelving:5 Supplied, Adjustable Agency Approval:TUV-CUE Temperature Control:0.1°C Display Increments Temperature Uniformity:+/- 0.5°C at 20°C Temperature Range:15°C to 40°C (at 20°C ambient) Exterior Dimensions WxDxH in. (cm):30 x 31.5 x 69.5 (76.2 x 80.1 x 176.6) Interior Dimensions WxDxH in. (cm):25.5 x 24 x 54.5 (64.7 x 60.9 x 138.4) Capacity:19.3 Cu.Ft. (546 L) Capacity of Standard B.O.D. Bottles:300 Maximum Energy Consumption (W):660/840
All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time.
