Data outputs to help meet internal and regulatory documentation requirements.
24 Month Limited Warranty
Construction:
Heated triple-pane glass door minimizes condensation and permits a clear view
One thru-wall access ports for probes, sensors, power cords
Copper drain for contamination control
Stainless-steel interior
Heavy-duty, solid stainless-steel shelves resist corrosion; adjust on 0.5 in. centers
Recommended for: Culturing large volumes of patient samples for bacterial growth, performing short-term growth studies, working with large volume products.
Please note this unit needs to be plumbed with distilled water or filtered tap water. Water resistance must be in the range of 50K-1M Ohm/cm or conductivity range of 20.0-1.0 uS/cm. If your laboratory cannot support this water quality, purchase the SHEL LAB Water Purification Kit. See the installation and operation manual for more information.
SKU:SCO26H Weight:850 lbs Overtemperature Alarm:Yes Access Port:Yes Shelving:6 Supplied (30 Maximum) Relative Humidity Range:Up to 95% Jacket Type:Forced Air CO2 Recovery Rate:< 5 minutes CO2 Sensor:IR CO2 Range:0-20% Temperature Control:+/-0.1°C Temperature Uniformity:+/-0.5°C (at 37°C) Temperature Range:Ambient +5°C to 50°C Exterior Dimensions WxDxH in. (cm):39.3 x 37.0 x 78.5 (99.7 x 94.0 x 199.4) Interior Dimensions WxDxH in. (cm):30.7 x 26.0 x 56.5 (78.1 x 66.0 x 143.5) Capacity:26.1 Cu.Ft. (740 L)
All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time.